Build the winding machine
A turntable carries the nail board; a thread guide above its rim moves only in and out and up and down. Everything here is worked out from one set of dimensions, for a 600 mm nail circle with 240 nails: the 3D model, the printed parts, the drilling plans and the controller settings. The machine page plans the moves and writes the G-code.
Loading the 3D model…
The numbers
Parts to buy
Parts to print
Each file is turned the way it prints best and sits on the bed. 0.2 mm layers unless the note says otherwise. The FreeCAD model holds every part and can be changed.
Drilling plans
The true-size files are in millimetres: print them at 100 % (most PDF viewers can split a large page into tiles) or use them to mark out. The nail board uses the nail template from the app.
Thread tension
Wiring
Controller settings
Send these once to GRBL 1.1 from any G-code sender; GRBL keeps them.